TiAL 38mm Billet Wastegate - Mitsubishi 12 PSI By-Pass Valve - Dual 4 into 1 (1 3/4") Tubular Headers with 1/2" Thick Laser Cut Header Flanges and V-Band Connections - 2 ½" Cross Over w/ SS Reinforced Heavy Duty Flex Joint - Mitsubishi By-Pass Valve - Radiant Thermal Blanket for the Turbine Housing you can take the car to operating temp and lay your hand on the turbo, keeps heat where it belongs, in the turbo turbine housing! - AirCraft Grade Stainless Steel Hose Clamps - Stainless Steel V-Band Clamp Exhaust Connections - BEGI Fully Adjustable Billet FMU - Your Choice of Polished Silver or Satin Black 2000 Degree Aerospace Ceramic Coating on the Hot Parts! Steel Braided Oil Feed and Oil Drain Lines with XRP AN Fittings - Blue High Grade 4 Ply Silicone Hose Connectors - HIgh Flow MAC Air Intake Air Filter - 3" Down Pipe w/ a PTK Y-Pipe that will connect to factory flow tubes for a seamless exhaust system!
No Aftermarket H or X Pipes to buy. - All Hot parts use V-Band Clamp and Ball & Joint Connections for LEAK FREE and Maintenance Free Operation. - All Flanges on PTK Kits use 1/2" Thick Laser Cut Flanges.
Kit Includes a TE-44 Garrett Turbo Head Unit which will support up to 565 hp efficiently!
Our Kits are based on Draw Thru Mass Air Meters, That is why we have ZERO Drivability Issues, Some of our Competitors use a Blow Thru Mass Air System, which is exactly why they have drivability problems!
These same Competitiors use a Slip Fit Cross Over Tubes, The only reason to use 20 year old "Slip Fit" cross over is "one kit Fits All" or lack of precise fitting! - Slip Fit on the exhaust is prone to Exhaust Leaks and Loss of Boost blow by?
Detailed Instruction manual.
** Install is about 12-15 hrs.
We have over 500 of these kits on the street! This kit on a stock 5.0 liter with Factory heads, intake, etc..at 8 psi of Boost on 93 Pump Gas will make 375 Horsepower and over 400 Ft lbs of Torque at thew rear tires.
Turbo's make 30% more torque at the same Boost as a supercharger and make more horsepower at 25% less RPM, less stress to your engine!
You can always upgrade this kit with a larger turbo down the road. this kit will accept all the way up to a T-76 GTS turbo which will support up to 1100 hp! The engineering of this kit is second to none, the headers, and cross over pipe.
This is our COMPLETE "Super Saver" Kit that with the TE-44 turbo will support up to 565hp ** Install is about 12-15 hrs. 79-86 Mustangs have to have been converted to a Mass Air electronic Fuel Injection!